- Model: FG-K-302 frosted effect films
- Stock: In Stock
Available Options
Buy FG-K-302 Frosted Vinyl Window Film - Cut to Size
FG-K-302 is a light grey frosted vinyl for windows - the middle option in our frost range. It hides what is behind the glass from both sides, day and night, and keeps the room bright. Every piece is cut to your size for free.

What the film looks and feels like
Where FG-K-300 is clearly rough, FG-K-302 is almost smooth: run your fingers over it and the frost is barely there. The tone is a soft light grey that blends into most interiors without drawing attention. On the window the surface reads as real frosted glass, not as a sticker. All photos on this page are real: the same FG-K-302 in different rooms and under different lighting, so what you see is what arrives.
FG-K-302 technical data
| Parameter | Value |
|---|---|
| Frost level | Classic Frost - the middle of our scale |
| Privacy | Standard - both directions, day and night |
| Texture | Almost smooth, barely noticeable frost |
| Colour | Light grey |
| Light transmission (VLT) | 76% |
| Solar energy rejected (TSER) | 18% |
| UV rejected | 99% |
| Material | PVC (vinyl) |
| Release liner | Kraft paper |
| Installation | Interior, wet application |
Where FG-K-302 works best
Bathrooms, dressing rooms, glass doors in offices and homes - anywhere you want privacy without losing light. Out of the whole range this is the one usually picked for living spaces: the surface is almost smooth and easy to wipe, and the light grey tone stays quiet in the interior. Need the frost at full strength? Then look at FG-K-300 in the list below - denser, with a pronounced texture.
Like every frosted glass vinyl, it works round the clock: the effect does not flip at night - but you will not see the street through it either.
Precision cutting of frosted window vinyl
- Cutting accuracy of 0.1 mm per metre.
- Neat, finished corners on every piece.
- Each piece is labelled with its size and name for easy identification.
Learn more about the service in the frosted window film cut to size section of our website.
Customised for you
Send your measurements in centimetres - the piece arrives ready to install, no trimming needed. Prices start from £3 per unit, and the total cost is calculated instantly on the page, without registration.

Wet installation
FG-K-302 is a self adhesive frosted film: the glue is already on the vinyl, protected by a kraft paper release liner. Peel the liner off, wet the glass and the adhesive side with mounting solution, position the piece and squeegee the water out. The wet method is standard for vinyl frosting for windows - while the surface is wet, the piece can still be adjusted. Details are in the self-adhesive window films section.
Other frost films to consider
If FG-K-302 is not the one, here is the rest of our frosted film for windows range:
- FG-K/300 - Intense Frost: the densest one, with a pronounced rough texture and maximum privacy.
- FG-K/300 BF - the same intense frost with air channels for a dry, bubble-free fit.
- Kpmf 51112 Silver - sandblast effect, the most textured of all, with a silver shade.
- FG-Etched Clear - a completely smooth etched-glass look: feels like glass, maximum privacy.
- FG-51131-Gold - a gold-toned etched finish.
- FG-Clear Bubble - a decorative bubble-textured option.
- DLX-01-01W White - white matt PET, matte rather than frost.
The full range is on the frosted film for glass page; FG-K-302 also belongs to the vinyl window film category.


Every order includes detailed installation instructions, mounting concentrate, a film application tool and a free test piece for practice - all complimentary. Add your dimensions to the basket and pay as you prefer: PayPal, Visa or Mastercard.